🚗
Fits any OBD-II car
Works with virtually every vehicle sold since 2008 — plus dedicated fitment for Mini and BMW.
Subscribe to our emails
Be the first to know about new collections and special offers.
Works On Any Car With An OBD-II Port · Plug & Play · No Cutting
See everything your dash won't tell you.
Works on virtually any car, truck or SUV — if it has an OBD-II port (almost every vehicle since 2008), MiniGauge works. A crisp AMOLED gauge that streams boost, temps, voltage and more in real time, with dedicated fitment for Mini and BMW.
✅ Works on ALL OBD-II cars🚗 Any make & model since 2008🔧 Dedicated fit: Mini & BMW
10Min Install
1.6"AMOLED
20+Live PIDs
OBD-IINo Splicing
🔌
If it has an OBD-II port, MiniGauge works.
That's virtually every car, truck and SUV sold since 2008 (and many European models back to 2001). Mini and BMW get dedicated fitment guides and model-matched mounts — but you can plug MiniGauge into whatever you drive.
ANY OBD-II CAR•R50•R52•R53•E39•E46•E53•E83•E85•
ANY OBD-II CAR•R50•R52•R53•E39•E46•E53•E83•E85•
Why MiniGauge
Universal data. Tailored fit.
⚡
Truly plug & play
Connects through the OBD-II port. No splicing, no drilling, no tune. Live data in minutes.
🌡️
20+ live parameters
Boost, coolant & intake temps, voltage, RPM, AFR, throttle — switchable on the fly. (Oil temp & pressure via the optional Sensor Box.)
🖥️
Vivid AMOLED
A round 1.6" AMOLED with deep blacks and bold color, readable in sun and dimming at night.
🔧
Fits standard 52mm pods
Drops straight into any standard 52mm gauge pod — plus model-matched vent & dash mounts for Mini and BMW.
🚨
Custom alerts
Set thresholds for any value. The gauge flashes and shifts color the moment something runs hot.
Wired or wireless
Two ways to run it.
Hardwire it once for a permanent install, or go fully wireless and move it between cars in seconds.
🔌
Wired mode
Plug straight into the OBD-II port for constant power and data — set-and-forget, always on with the key. Ideal for a clean, permanent dash install.
📶
Wireless mode
Connects wirelessly to your car and runs on a built-in all-day battery — no wires on show. Pair it once and move it between cars in seconds, from the daily to the track car and back.
🛢️
Optional add-on · sold separately
Oil pressure & oil temp need the Sensor Box.
Oil pressure and oil temperature can't be read from the OBD-II port, so they require the MiniGauge Sensor Box — a separate add-on with dedicated sensors. Add it to display true oil pressure and oil temp right alongside your live OBD-II data.
Meet MiniGauge
A precision gauge, beautifully lit.
A round 1.6″ AMOLED in a machined-look housing. Here's the device and a few of its switchable screens. (Product render — final hardware may vary.)
Real screens · real cars
In the wild
Looks right at home.
A clean, factory-style fit — here's MiniGauge mounted right next to the cluster in a MINI.
One screen · every reading
Switch screens on the fly.
Tap through boost, voltage, temps, RPM and speed — or let it auto-cycle. Here's a live preview of the display.
Try it yourself
Play with a live gauge.
An interactive preview of the MiniGauge display — tap through it right here in your browser.
Less clutter, more data
One gauge replaces the whole stack.
Why bolt three or four analog gauges to your dash — each with its own sender, wiring and hole to drill — when a single MiniGauge shows 20+ live readings on one screen?
The old way
- ❌ A separate gauge for boost, oil, volts & temp
- ❌ Cutting and drilling your dash
- ❌ Wiring and senders for every gauge
- ❌ Cluttered, mismatched pods
- ❌ Still can't read fault codes
With MiniGauge
- ✅ 20+ readings on one vivid AMOLED screen
- ✅ Plugs into the OBD-II port — no cutting
- ✅ Fits a single standard 52mm pod
- ✅ Switchable screens + custom alarms
- ✅ Reads & clears OBD-II fault codes
Built-in protection
Alarms that protect your engine.
Set a threshold for any reading and MiniGauge flashes and shifts color the instant something runs out of range — so you catch trouble before it becomes a repair bill.
🌡️
Overheating protection
A coolant-temp alarm warns you the moment your engine starts running hot — back off before any damage is done.
🔋
Battery voltage alarm
Catch a failing alternator or weak battery early with low- and high-voltage warnings front and center.
🌀
Intake air temp alarm
Get a heat-soak warning when intake air temps climb and power drops — know before you lean on it.
🛢️
Oil temp & pressure alarm
With the optional Sensor Box add-on, get warned before oil temp or pressure reaches the danger zone.
🚦
Overboost alarm
Set a boost limit and get warned the instant it spikes past — protect a turbo build from running away.
For the spirited drives
Track your runs, not just your temps.
MiniGauge isn't only about keeping things safe — it helps you measure and chase performance, too.
⏱️
0–60 & quarter-mile
Built-in timers clock your acceleration and save your best run automatically.
📈
Peak hold
Captures the max boost, temp and RPM from each drive so nothing slips past you.
🌗
Day/night auto-dim
Reads clearly in bright sun and dims at night so it never blinds you on a late drive.
Fitment
Works on any car — perfected for Mini & BMW.
MiniGauge reads virtually any OBD-II vehicle — any make, any model, since 2008. Mini and BMW just get extra love: model-matched mounts and fitment guides.
BRITISH ICON
MINI
R50Cooper Hatch2001–2006
R52Cooper Convertible2004–2008
R53Cooper S Supercharged2002–2006
GERMAN PRECISION
BMW
E395 Series1995–2003
E463 Series1998–2006
E53X51999–2006
E83X32003–2010
E85Z4 Roadster2002–2008
Drive something else? It still works — MiniGauge reads any OBD-II vehicle sold since 2008.
The hardware
Small footprint. Serious internals.
Hand-assembled and bench-tested before it ships. No flimsy parts, no laggy screen.
- Display1.6" round AMOLED, 466×466
- ConnectionOBD-II (CAN / ISO)
- CompatibilityAny OBD-II vehicle
- Refresh rateUp to 50 readings/sec
- Power12V via OBD, <0.5A
- ModesWired (OBD-II) or wireless w/ all-day battery
- FitmentStandard 52mm gauge pod (universal)
- MountModel-matched (Mini / BMW)
- Add-onsOil pressure & oil temp Sensor Box (sold separately)
- Warranty1 year, US support
Limited First Run
Get your MiniGauge.
Fits any OBD-II vehicle, with dedicated fitment for Mini and BMW. In the box: the 1.6″ AMOLED gauge, OBD-II plug-and-play harness and quick-start guide. 1-year warranty & US support.
Pre-Order